QI have a 2004 XC90 with a bad radio ICM and yaw position sensor. I think the driver door module is also bad. Driver window, lock and mirror don’t work. Did hard system reset, radio came back to life with a blank screen previously not working. Recently bought car…

What info do I need for replacement radio and will the car need to be programmed to accept it? Do you have a good driver door module? What is the difference between DDM and master window switch?

A:Yes you need the radio if you screen in blank, I do have that for you, also if you need the yaw rate sensor because the anti skid message is on I do have it too, it looks like you also need the driver door switch which I also have,
I have sold hundreds of the radios and the sensors, if it goes to the radio it usually works as plug and play once you give me the part number off your old, but sometimes it takes few to make it work as plug and play, I do have also ways few of these in stock so I will exchange it if needed, if it goes to the yaw rate sensor it is plug and play and once you replace it and replace the plug it will work right away but you also need to fix the logged sun roof drain this is the reason water came under the passenger seat where the yaw rate sensor is located, window switch also should work as plug and play,